Best snowboard edge tuner how to#
Best snowboard edge tuner free#

P-Tex Candle (black/graphite for black bases clear for white/colored bases).What you’ll need for a P-Tex snowboard repair: All you need to do is use p-tex to fill the hole, wax over it, and you’re ready to get back on the mountain. Riders use p-tex to repair a rock gouge in their board.ĭon’t worry if it happens to you, a rock gouge doesn’t necessarily mean this is the end of your board’s life. When you hear riders talking about p-tex, they’re referring to the material used for a ski or snowboards base, and it’s short for polyethylene. Step 2: Using longer strokes, file down the edge with the teeth running perpendicular to the edge, taking out any nicks, burrs, or rust. If you want to sharpen your edges at home, here’s how:

Best snowboard edge tuner free#

If you have a Never Summer board, feel free to bring it in or contact to send it back to the factory to have the edges sharpened for you. Full-service snowboard tuning shops will have an edge sharpening machine. You can definitely do this maintenance at home, but bringing it to a shop with an edge/base grinding machine is the best option. Sharpening the edges helps to keep your board in top shape and give you a smoother ride. A smooth sharp edge will increase the overall carving performance of a snowboard as well as edge hold on hard packed snow and icy conditions. If your board is showing any of these signs–your edges need to be sharpened!Ī properly sharpened edge will take off some of your fingernail when scraped against it. The board’s edges should be sharpened when there are nicks, burrs, rust, or the edge is dull. To do this, hold the file at a 10-15 degree angle and lightly run the file down the edge. Step 2: From the contact points inward, dull the edge 1”-2”. To find the main contact point, put the board on its side, look toward the tip or tail (where the board is starting to upturn) and you’ll see a line where the sidewall ends and another piece starts. This is the part of the board that is most often coming into contact with the snow underneath. Step 1: Locate the main contact point on a snowboard. To detune your snowboard edges you’ll need: This will affect the board’s edge permanently.

However, be careful because if you detune more than 2” from the contact points you cannot bring the edge back. Riders who want to make sure they’re constantly detuning their board are those who are buttering, doing flat ground spin tricks, or sliding on rails and boxes.

You want your edges to land in the middle of the spectrum of detuned and sharpened for the ideal ride.

Best snowboard edge tuner how to#

How to Detune Snowboard Edgesĭetuning an edge helps to allow the board to smoothly transition from edge to edge without the sharp new edge catching. If you want to do this yourself, check out our article “ How to Wax a Snowboard at Home“, otherwise, find a reputable snowboard shop that can help you wax your snowboard every few rides.

Waxing your snowboard is one of the things you’ll do most often to keep it in top-tier shape.

Set your board upright because water will drain down the board and rust nose or tail.

Lay your board flat on its base or on its side when it’s drying.

To dry off your snowboard: Lay the board upside down on the bindings to allow the snow to melt and the water to drain off the board. These simple tips will keep your edges rust free. You can remove rust easily with a gummy stone, file, fine sandpaper, or a base grind. It’s important to properly dry off your snowboard when returning from the ski resort.Ī wet board that isn’t dried off properly, leads to rusted edges, which decreases the performance of the snowboard and corrosion to the metal edge. Let’s dive in! How To Dry Off A Snowboard

Optional: Vise or something to hold the boardĭon’t worry, snowboards don’t require a ton of maintenance, and most of it will become second-nature once you’ve done it a few times.

In this post, the snowboard maintenance tips we’ll cover include: You want the board to last season after season, and the only way to ensure this happens, is to do a snowboard tune up and maintain it regularly. When you buy a snowboard, you don’t want to wear it out too quickly.